3.5" Color LCD_320×480_ILI9488_RGB/SPI/MCU

  • Resolution: 320 x 480 dots
  • Viewing angle: 12 O'clock
  • 接口类型:RGB/SPI/MCU
  • Driver chip: ILI9488
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • 外形尺寸:54.48(W)* 84.71(H) * 3.50(T)mm

Basic description

3.5寸TFT LCD显示屏分辨率320×480,驱动IC为ILI9488,亮度高达280-800cd/m2(典型值),支持MCU/SPI/RGB接口,可提供标准型号和定制MIPI接口。有TN屏视角和IPS屏全视角两种规格,可提供更宽的视角,高清高亮度的LCD液晶显示屏,满足工业级和消费级生产工艺要求,质量稳定。

ICPD LcdmonitorQuality is higher than the industry standard, batch products without color deviation, color and brightness consistent, in line with industrial and consumer grade production process requirements, stable quality, good customer reputation and credibility in the LCD display industry, welcome to call us, we will provide you with the best quality products and services.

  • Backlight brightness can be selected, general brightness:250~300cd/m2, medium brightness:400~500cd/m2; high brightness 800~1000cd/m2.
  • Can be customized according to customer's requirements to change FPC interface, backlight brightness, life time, and form factor.
  • Resistive touch screen or capacitive touch screen can be selected according to customers' needs.
  • Multiple lamination options, frame lamination, OCA full lamination.
  • The above are some of the conventional TN/IPS type TFT standard LCDs.
sports event element unit (of measure)
sizes 3.5 inch inch (unit of length equal 2.54 cm.)
Overall dimensions 54.48(W)* 84.71(H) * 3.50(T) millimetre
display area 48.96 x 73.44 millimetre
fractional 320×480
LCD Type a-Si TFT
visual angle 12 o'clock
driver chip ILI9488
Interface Type RGB/SPI/MCU
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 6 LEDs

The above display technical parameters are based onLCD displayThe specification of the book shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

K350C4518CT-drawing

PIN Definition

pin number Pin Definitions Functional Description
1 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective
2 LEDA Backlight Positive
3 LEDA Backlight Positive
4 LEDK Backlight Negative
5 LEDK Backlight Negative
6 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective
7 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective
8 VCC system voltage
9 IOVCC Interface Voltage
10 RESET reset signal
11 VS frame synchronization
12 HS line synchronization
13 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective
14 DCLK Data Bit Clock
15 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective
16 DE Data Valid Enable Signal
17-22 R5-R0 data cable
23-28 G5-G0 data cable
29-34 B5-B0 data cable
35 SDO Serial data output
36 SDI data entry
37 RD Read Signal, Low Active
38 WR/SCL 写信号,低有效/时钟
39 DC data output
40 CS film selection
41 TE frame synchronization signal
42 XR Touch right
43 YD touchdown
44 XL Touch left
45 YU touching up

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Scroll to Top