3.5寸显示屏_TFT液晶屏_IPS全视角LCD屏幕_320x480

  • Resolution: 320 x 480 dots
  • Viewing angle: IPS
  • Interface type: RGB(18bit)
  • Driver chip: ST7796S
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • 外形尺寸:54.48(W)* 84.71(H) * 2.3

Basic description

3.5寸显示屏分辨率为320×480像素,驱动IC为ST7796S,亮度高达320-800cd/m2(典型值),可定制开发更改背光亮度,接口类型,LCD显示屏一般有TN普通视角和IPS全视角两种,可以用偏光片调节,具有更宽的视角,高清高亮度的宽视角。可增加触摸屏控制,CTP电容式触摸屏和RTP电阻式触摸屏。泓彩Lcd显示屏质量高于行业标准,批量产品无偏色,颜色和亮度一致,符合工业级和消费级生产工艺要求,质量稳定,供货持续,售后服务和技术支持无忧。

sports event element unit (of measure)
sizes 3.5-inch display inch (unit of length equal 2.54 cm.)
Overall dimensions 54.48(W)* 84.71(H) * 2.3(T) millimetre
display area 48.96 * 73.44 millimetre
fractional 320×480
LCD Type a-Si TFT
visual angle IPS
driver chip ST7796S
Interface Type RGB (18bit)
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 6 LEDs

The above display technical parameters are based onLCD displayThe specification of the book shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

H35J4502-CAD

PIN Definition

NO. Symbol Description
1 GND Ground
2 LEDA BACKLIGHT ANODE
3 LEDA BACKLIGHT ANODE
4 LEDK BACKLIGHT CATHODE
5 LEDK BACKLIGHT CATHODE
6 GND Ground
7 GND Ground
8 VCC POWER SUPPLY
9 IOVCC I/O POWER SUPPLY
10 RESET Reset pin
11 VSYNC Frame Synchronizing Signal
12 HSYNC Line Synchronizing Signal
13 GND Ground
14 DOTCLK Dot Clock Signa
15 GND Ground
16 DE Data Enable Signal
17-34 DB17-DB0 Data Bus
35 SDO Serial Data Output
36 SDI Serial Data Input
37 RD Read signal, rising-edge-active.
38 WR/SCL Write signal, rising-edge-trigger./Serial  Clock
39 D/CX Data/Command registor selection.
40 CS Chip Select
41 TE Frame mark.
42 XR Touch Panel Right
43 YD Touch Panel Down
44 XL Touch Panel Left
45 YU Touch Panel Up

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Scroll to Top