Product Center

Main Menu
TFT Products

look for sth.
C32T5001-LCD

3.2-inch LCD_TFT display_Resolution 240×400

  • Resolution: 240 x 400 dots
  • Viewing angle: 12 o'clock
  • Interface Type: RGB
  • Driver chip: ST7793
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • 外形尺寸：47.66（W）* 80.90（H） * 2.3(T)
Inquire about pricing now
136 8646 9431

Basic description

3.2寸TFT LCD液晶显示屏分辨率240×400，驱动IC为ST7793，亮度高达280-800cd/m2，RGB接口，可提供标准型号和定制MIPI接口。有TN屏视角和IPS屏全视角两种规格，可提供更宽的视角，高清高亮度的LCD液晶显示屏，满足工业级和消费级生产工艺要求。

ICP DAS Lcd display quality is higher than the industry standard, batch products without color deviation, color and brightness consistency, in line with industrial and consumer grade production process requirements, stable quality, LCD display industry good customer reputation and credibility, welcome to call us, we will provide you with the best quality products and services.

sports event element unit (of measure)
sizes 3.2-inch display inch (unit of length equal 2.54 cm.)
Overall dimensions 47.66（W）* 80.90（H） * 2.3(T) millimetre
display area 41.76 * 69.60 millimetre
fractional 240 x 400
LCD Type a-Si TFT
visual angle 12 o'clock
driver chip ST7793
Interface Type RGB
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 4 LEDs

The above display technical parameters are based on LCDmonitorThe specification of the book shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

C32T5001-CAD

PIN Definition

NO. Symbol Description
1 XR Touch panel X coordinate right
2 YD  Touch panel Y coordinate down
3 XL Touch panel X coordinate left
4 YU Touch panel Y coordinate up
5 GND Ground
6 GND Ground
7 NC Not Connect
8 IOVCC Connect to an external power supply of 2.5 ~ 3.3V.
9 VCC Connect to an external power supply of 1.8 ~ 3.3V.
10 SDO SPI interface output pin
11 DB9 Data bus
12 DB0 Data bus
13-20 DB8-DB1 Data bus
21-28 DB17-DB10 Data bus
29 SDA serial data input/output bi-direction pin
30 PCLK Dot clock signal
31 DE A data ENABLE input signal
32 HSYNC Line synchronizing signal
33 VSYNC Frame synchronizing signal
34 RD Read enable
35 WR Write enable
36 D/C Display data/command selection
37 CS Chip selection pin
38 RESET Reset pin
39 IM0 interface mode select
40 IM1 interface mode select
41 IM2 interface mode select
42 NC Not Connect
43 GND Ground
44-45 LED-A Anode of backlight
46-49 LED-K Cathode of backlight
50 NC Not Connect

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

List of standard TFT displays
List of medium and large size lcd displays
Semi-reflective and semi-transparent tft display list

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Related products

Scroll to Top