2-inch TFT display_High brightness LCD_MCU8-bit/16-bit_SPI interface

  • Resolution: 176 x 220 dots
  • Viewing angle: 12 o'clock
  • Interface type: MCU/SPI
  • Driver chip: ILI9225G
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • Overall dimensions: 37.68(W) × 51.30(H) × 2.20(T)mm

Basic description

2.0 inch LCD screen resolution 176 x 220, driver IC for ILI9225G, brightness up to 330/m2, support for MCU interface.TFT LCD low cost, long service life, low voltage drive display, working temperature high temperature low temperature can be. Faster response speed, dynamic picture playback is smoother, contrast, high brightness can provide a more realistic, vivid display colors, IPS full viewing angle, the image seen at different angles will not be significantly distorted.

ICPD LcdmonitorQuality is higher than the industry standard, batch products without color deviation, color and brightness consistent, in line with industrial and consumer grade production process requirements, stable quality, good customer reputation and credibility in the LCD display industry, welcome to call us, we will provide you with the best quality products and services.

sports event element unit (of measure)
sizes 2.0-inch display inch (unit of length equal 2.54 cm.)
Overall dimensions 37.68(W) x 51.30(H) x 2.20(T) millimetre
display area 31.68x 39.60 millimetre
fractional 176 x 220
LCD Type a-Si TFT
visual angle 12 O'clock
driver chip ILI9225G
Interface Type MCU/SPI
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 3 LEDs

The above display technical parameters are based onLCD displayThe specification of the book shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

K200A20300-drawing

PIN Definition

pin number Pin Definitions Functional Description
1 VSS structural particle: used before a verb or adjective, linking it preceding the verb or adjective
2 RESET reset signal
3 RS data output
4 WR-SCK Write Signal, Low Active
5 RD Read Signal, Low Active
6 CS Chip Select, Low Efficiency
7 DB0 data cable
8 DB1 data cable
9 DB2 data cable
10 DB3 data cable
11 DB4 data cable
12 DB5 data cable
13 DB6 data cable
14 DB7 data cable
15 SDI data entry
16 VCC system voltage
17 TE frame synchronization signal
18 IM2 I/O Port Selection
19 LEDA Backlight Positive
20 LEDK Backlight Negative

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Scroll to Top