2.2-inch semi-reflective and semi-transparent LCD display_outdoor sunlight visible

  • Resolution: 176 x 220 dots
  • Viewing angle: IPS
  • Interface type: MCU
  • Driver chip: GC9203
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • Dimensions: 40.30(W)*54.36(H)*2.20(T)

Basic description

2.2 inch half reverse half translucent LCD liquid crystal display resolution of 176 x 220, driver IC for GC9203, half reverse half translucent lcd display and half translucent half reflective LCD display, specific low power consumption, high transmittance of the display effect, sunlight visible, can improve the tft lcd liquid crystal display in the sunlight visual effect. Reflective display mode power for the transmissive mode of 10%, with ultra-low power consumption display characteristics, compared with the existing PID high brightness products, TRD outdoor display power consumption can be reduced by about 90%. in the dynamic display, dynamic switching effect is better, no ghosting problem.

ICPD LcdmonitorQuality is higher than the industry standard, batch products without color deviation, color and brightness consistent, in line with industrial and consumer grade production process requirements, stable quality, good customer reputation and credibility in the LCD display industry, welcome to call us, we will provide you with the best quality products and services.

sports event element unit (of measure)
sizes 2.2-inch display inch (unit of length equal 2.54 cm.)
Overall dimensions 40.30(W)*54.36(H)*2.20(T) millimetre
display area 35.08*43.82 millimetre
fractional 176×220
LCD Type a-Si TFT
visual angle IPS
driver chip GC9203
Interface Type MCU
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 3 LEDs

The above display technical parameters are based onLCD displayThe specification of the book shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

2.2inch transflective

PIN Definition

NO. Symbol Description
1 XL NC
2 YU NC
3 XR NC
4 YD NC
5 GND Groud
6 IOVCC I/O power supply (1.8V/2.8/3.3V)
7 VCI Power supply (2.8V/3.3V)
8 FMARK Frame synchronization signal
9 CS Chip select signal.
10 RS Display data/command selection
11 WR Write enable in MCU parallel interface.
12 RD Read enable in 8080 MCU parallel interface. low-active.
13 SPI_SDI Serial data input.
14 SPI_SDO Serial data output.Let it open if not use.
15 RESET Reset pin
16 GND Ground
17-32 DB0-DB15 Data Bus
33 A Power supply for backlight anode
34 K Power supply for backlight cathode
35 K Power supply for backlight cathode
36 K Power supply for backlight cathode
37 GND Ground
38 IM0  

2.2INCH

 

Please see note 1

39 IM1
40 IM2

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Scroll to Top